IMGP1720.JPGIMGP1725.JPGIMGP1726.JPGIMGP1728.JPGIMGP1729.JPGIMGP1738.JPGIMGP1735.JPGIMGP1741.JPGIMGP1744.JPGIMGP1745.JPGIMGP1753.JPGIMGP1755.JPGIMGP1761.JPGIMGP1766.JPGIMGP1768.JPGIMGP1774.JPGIMGP1776.JPGIMGP1777.JPGIMGP1778.JPGIMGP1780.JPGIMGP1781.JPGIMGP1782.JPGIMGP1783.JPGIMGP1785.JPGIMGP1786.JPGIMGP1787.JPGIMGP1788.JPGIMGP1790.JPGIMGP1795.JPGIMGP1797.JPGIMGP1802.JPGIMGP1816.JPGIMGP1817.JPGIMGP1818.JPGIMGP1819.JPGIMGP1820.JPGIMGP1827.JPGIMGP1828.JPGIMGP1829.JPGIMGP1832.JPGIMGP1834.JPGIMGP1835.JPGDSC06526.JPGDSC06527.JPGDSC06528.JPGDSC06530.JPGDSC06531.JPGDSC06532.JPG
Construction phases
The collection of photographs illustrates the steps of disassembly of the original model and the assembly of the model version tilting; as can be noted, in addition to the re-use of most of the pieces of the original kit, which was an off-road vehicle, were constructed of the new aluminum parts such as engine mount, the front triangular support for the toothed wheels, the two levers rear for connection to the rear drive wheel and for the connection of the shock absorbers.
Always aluminum was made the hub of the rear wheel while other parts such as pulleys and the relative belt, the two toothed wheels front nylon (to transmit the oscillating motion from the actuator to the connecting rods of the two front shock absorbers), the support the bearing shaft connected to the motor and bearings were purchased on market.
Create a website